LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> Golf Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Maintenance, Diagnosis - Maintenance Procedures (As Of 08.2009) (Sedan) (A5 Platform)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Wheel Bolts Tightening Specification >> Removing the Center Wheel Trim

Removing the Center Wheel Trim

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

On vehicles with alloy wheels, do not pry out center hubcap with screwdriver. Rather, use special tool designed for this purpose (puller hook in vehicle tool kit).

Extractor -1- for removing cover cap is located in vehicle tool kit.

Fig 1: Identifying Removal Of Center Wheel Cover
GWWN01-10637Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert removal hook into one of the holes of the center hubcap and pull in -direction of arrow-.

scientia non olet · About LEMON Manuals