LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> Golf Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Maintenance, Diagnosis - Maintenance Procedures (As Of 08.2009) (Sedan) (A5 Platform)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Wheel Bolts Tightening Specification >> Remove the Cap

Remove the Cap

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Wire Clip And Wrench From Vehicle Tools -Arrow A- To Remove Full Wheel Trim
GWWN01-10640Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If the vehicle has a decorative wheel hubcap, loosen the full wheel trim all around with the wire clip and wrench from the vehicle tools -arrow A- and then remove it -arrow B-.