LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> Golf Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Maintenance, Diagnosis - Maintenance Procedures (As Of 08.2009) (Sedan) (A5 Platform)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Wheel Bolts Tightening Specification >> Anti-Theft Wheel Bolts, Loosening and Tightening

Anti-Theft Wheel Bolts, Loosening and Tightening

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Anti-Theft Wheel Bolt And Key
GWWN01-10639Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

A special adapter is required to loosen/tighten anti-theft wheel bolts. It is included in the vehicle tool kit.

Do not use an impact wrench to loosen anti-theft wheel bolts (lockable wheel bolts).

If the adapter to loosen/tighten the anti-theft wheel bolts is not present in the vehicle, use Master Wheel Bolt Key Set.

Special tools and workshop equipment required 

-- Slide the adapter -2- into the anti-theft wheel bolt -1-.

Fig 5: Identifying Anti-Theft Wheel Bolt And Key
GWWN01-10639Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Slide wheel wrench on to adapter -2- until it stops.