LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> Golf Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Maintenance, Diagnosis - Maintenance Procedures (As Of 08.2009) (Sedan) (A5 Platform)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Tire Pressure Sensors, Removing And Installing

Tire Pressure Sensors, Removing And Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.

Tire pressure sensors must be replaced only for "Tire pressure monitoring system" with PR number 7K3. The system "Tire monitor indicator" with PR number 7K6 offered in parallel does not have tire pressure sensors. TPMS compares the speed, i.e. the rolling circumference of the individual wheels using the ABS sensors.

Also refer to Self Study Program number 347

NOTE:

Tire pressure sensor is located on inside of disc wheel or rim.

For removal and installation of tire pressure sensor, wheel and tire must be separated.

-- Refer to Removal and Installation

scientia non olet · About LEMON Manuals