LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> Golf Automatic >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> 2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform) >> 10 Engine - Assembly >> Engine, removing and installing >> Assembly mounting

Assembly mounting

Tightening torques 

Fig 1: Identifying Engine Mounting Bracket & Bolts
GW00000016Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engine mounting

1 - Bracket to body 1) 40 Nm plus 90 ° (1/4 turn)
2 - Mounting/bracket to body 25 Nm
3 - Mounting to body 100 Nm

1) Replace bolts

Fig 2: Identifying Transmission Mounting Bracket & Bolts
GW00000017Courtesy of VOLKSWAGEN UNITED STATES, INC.

Transmission mounting

1 - Mounting to body 1) 40 Nm plus 90 ° (1/4 turn)
2 - Mounting to body 25 Nm
3 - Mounting to transmission bracket 100Nm

1) Replace bolts

Fig 3: Identifying Pendulum Support & Bolts
GW00000018Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pendulum support

1 - Pendulum support to transmission 40 Nm plus 90 ° (1/4 turn)
2 - Pendulum support to transmission 40 Nm plus 90 ° (1/4 turn)
3 - Pendulum support to subframe 20 Nm plus 90 ° (1/4 turn)
scientia non olet · About LEMON Manuals