LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> Golf Automatic >> Repair and Diagnosis >> Engine Mechanical >> 2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform) >> 13 Engine - Crankshaft, Cylinder block >> Piston and connecting rod, disassembling and assembling >> Piston and connecting rod, disassembling and assembling

Piston and connecting rod, disassembling and assembling

Fig 1: Identifying Conventional Connecting Rods (Polished Parting Surfaces) & Industrially Cracked Connecting Rods (Rough Parting Surfaces)
GW00000049Courtesy of VOLKSWAGEN UNITED STATES, INC.

Gradual introduction of industrially cracked connecting rods

Identification characteristics:

A - Conventional connecting rods (polished parting surfaces).

B - Industrially cracked connecting rods (rough parting surfaces).

Disassembling and assembling pistons and conventional connecting rods. Refer to Conventional connecting rod 

Disassembling and assembling pistons and industrially cracked connecting rods. Refer to Industrially cracked connecting rod 

scientia non olet · About LEMON Manuals