Fuel supply system components, removing and installing: Notes
WARNING: This page is about a different car, the 1999 Volkswagen Jetta, 1996 Volkswagen Passat, and 1996 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Checking fuel system for leaks
- Removing and installing fuel filter and draining water, engine code AAZ: See DIESEL FUEL INJECTION SYSTEM, COMPONENT LAYOUT .
- Removing and installing fuel filter and draining water, engine codes 1Z, AHU: See FUEL FILTER, SERVICING .
- Observe safety precautions, see SAFETY PRECAUTIONS WHEN WORKING ON THE FUEL SUPPLY SYSTEM
- Observe rules of cleanliness, see RULES OF CLEANLINESS
- Accelerator pedal linkage, servicing (AAZ), see ACCELERATOR PEDAL LINKAGE, SERVICING
- Cold Start Accelerator (CSA) cable, overview (AAZ), see COLD START ACCELERATOR (CSA) CABLE, OVERVIEW
NOTE:
- Hose connections are secured with either screw-type clamps or spring-type clips.
- Always replace spring-type clips with screw-type clamps.