Special Tools

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Thrust PadVW 512
Replacement Stud (8 mm/10 mm)3114/2
Thrust PadVW 447 H
Thrust DiscVW 412
Tube SplitVW 422
Thrust PlateVW 401
Thrust PlateVW 402
PunchVW 408 A
Thrust PadVW 447 i
Mounting Universal Joint41-501
Taper Roller Bearing PullerV.A.G 1582
Attachment to VAG 1582V.A.G 1582/4
Attachment to VAG 1582V.A.G 1582/5
Driving Sleeve32 - 111
PunchVW 409
Support ChannelsVW 457
SleeveVW 519
Thrust RingVW 429
Tube 60 mm Dia.VW 415 A
Thrust TubeVW 454
Thrust TubeVW 455
PunchVW 411
Centering Mandrel 12 - 551
-1- Kukko Extractor 37-46 mm21/6
-1- Kukko Extractor 14.5-18.5 mm21/2
-3- Kukko Separating Tool 22-115 mm17/2
-3- Kukko Separating Tool 12-75 mm17/1
-4- Kukko Support22/1
-4- Kukko Support22/2

Fig 1: Identifying Kukko Tools
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Inductive Heater VAS 6414

Fig 2: Inductive Heater VAS 6414
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 3: Identifying Special Tools -- Input Shaft, Adjusting

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Dial Gauge HolderVW 387
Magnetic Plate 50 mm Dia.VW 385/17
Thrust PadVW 510
Thrust PadVW 447 i
PunchVW 407
Torque Wrench (5-50 Nm)V.A.G 1331