Engine and transmission mountings, aligning

Special tools and equipment

Fig 1: Identifying Support Assembly 10-222 A With Legs 10-222 A/1

Courtesy of VOLKSWAGEN UNITED STATES, INC.

CAUTION:

Before loosening bolts secure assembly using support device 10-222A.

Fig 2: Measuring Engine Mounting

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engine mounting

-a- = 14.0 mm

-b- = at least 10.0 mm

Both bolt heads -1- must be in flush with edge -c-

Fig 3: Measuring Transmission Mounting

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Transmission mounting

Edges -a- and -b- must be parallel with one another

-c- = 18 to 20 mm

NOTE: Tightening torques for assembly mounting. Refer to Assembly mounting .