Measurement preparations: Notes

Special tools, testers and auxiliary items required

• Brake Pedal Actuator V.A.G 1869/2

The lateral runout of the wheel must be compensated for. Otherwise the result of the measurement will be incorrect. 

If the lateral runout compensation is not performed it is not possible to adjust the toe correctly! 

When doing this observe the information from the manufacturer of the wheel alignment unit.

• Carry out wheel run-out compensation.
• Lower vehicle and bounce springs.
• Install Brake Pedal Actuator V.A.G 1869/2.
• Actuate the brake pedal with brake pedal loading device.