LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2007 >> Golf Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Gears, Shafts - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Reverse Shaft >> Removing the Needle Sleeve from the Clutch Housing

Removing the Needle Sleeve from the Clutch Housing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pulling Needle Bearing Out Of Clutch Housing
GWWV35-1152Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A -

Counter-support, for example, 22/1

B -

Internal puller 14.5 to 18.5 mm, for example, 21/2

NOTE:

The needle sleeve will get damaged when it removed and must be replaced.

scientia non olet · About LEMON Manuals