Seat and mirror settings for normal driving, activating

The settings stored can be activated via the memory buttons as well as by the radio wave remote control.

Activating via the memory buttons 

For safety reasons the seat and mirror settings can only be activated with the ignition switched off.

There are two possibilities for activating the stored settings:

One touch automatic memory: 

• With driver's door open briefly press the desired memory button. The seat and exterior mirrors move automatically to the stored positions.

Push and hold memory: 

• With the driver's door opened or closed press the desired memory button until the seat and exterior mirrors have moved into the stored positions.

Activating via the radio wave remote control 

For safety reasons the seat and mirror settings can only be activated with the ignition switched off.

• Briefly press the opening button of the radio wave remote control and then open the driver's door. The seat and exterior mirrors move automatically into the stored position.