Evaluating display group number 004

Display zone	Description	Display	Corrective action
1	Driver's side mirror potentiometer X position	0 to 100 %1)	Visual check of wiring Check that connectors of appropriate current circuit are correctly seated and tight while simultaneously watching the display If the content of the display does not change when checking the connectors the malfunction must be repaired, or the component in question must be replaced Erase DTC memory Perform functional check Check DTC memory again
2	Driver's side mirror potentiometer Y position	0 to 100%1)
3	Passenger's side mirror potentiometer X position	0 to 100%1)
4	Passenger's side mirror potentiometer Y position	0 to 100%1)

1) The displayed values are dependant upon the mechanical swivelling range of the mirror and only serve as a rough check. During normal operation the values 0% and 100% will not be obtained. (0% corresponds to short to Ground, 100% responds to short to B+).