Evaluating display group number 001

Display zone	Description	Display	Corrective action
1	Switch position for the individual keys -1-, -2-, -3-	0= off 1= on	Visual check of wiring Check that connectors of appropriate current circuit are correctly seated and tight while simultaneously watching the display If the content of the display does not change when checking the connectors the malfunction must be repaired, or the component in question must be replaced Erase DTC memory Perform functional check Check DTC memory again
2	Switch position emergency off (MEM OFF) Door contact	0 = off1), 1 = on 1 = door op, 0 = door cl
3	Key number	0 to 4

1) 0= Emergency off. No entries can be stored in this switch position.