Evaluating display group number 006

Display zone	Description		Display	Corrective action
1	S-terminal		operated not operated	Visual check of wiring Check that connections of relevant current circuit are correctly connected and seated securely while simultaneously observing display If the display does not change when operating, repair malfunction or replace relevant component Erase DTC memory Perform functional check Check DTC memory again
2	Key number		mv = 1 to 41)	When operating a "learned" radio wave key, the position of the "learned" key is shown. If the tester displays "0" even when the remote button is pressed, this key must be "re-synchronised" using adaptation (10).
					Continued on next chart

1) A max. of 4 remote keys can be "learned".

Display zone

Description

Display

Corrective action

2

Key switch

open
closed
not operated
implausible

Visual check of wiring
Check that connections of relevant current circuit are correctly connected and seated securely while simultaneously observing display

If the display does not change when operating, repair malfunction or replace relevant component
Erase DTC memory

Perform functional check
Check DTC memory again

3

Ignition

Terminal 15 on
Terminal 15 off