Control Module Version, checking

• Connecting scan tool. Refer to Scan tool, connecting  . Initiating On Board Diagnostic (OBD). Refer to Introducing On Board Diagnostic (OBD) for airbag  .
• Switch on printer with Print button (warning lamp in button lights up).
• Press buttons -0- and -1-.

Indicated on display:

Rapid data transfer Q 01-Check Control Module Version

• Confirm entry with the -Q- button.

Control module VW3 (example) 

Indicated on display (see parts catalog for latest control module version).

1J0 909 609 A AIRBAG VW 3 SG V03 → Coding 00068 WSC12345

Top line

• 1J0 909 609 A = Control module Part No.
• Airbag VW3 = System designation
• S = Side airbag, G = Elect. belt tensioner
• V03 = software version number

Lower line

• Coding XXXXX = Coding variants
• WSC XXXXX = Dealership number (Will be automatically stored in the control module when entering the system)

• Press → button.

Indicated on display:

Rapid data transfer HELP Enter address word XX

Control module VW5 (example) 

Indicated on display (see parts catalog for latest control module version).

6Q0909605 A 0F AIRBAG VW5 02 0004 → Coding 12358 WSC12345

Top line

• 6Q0909605 A = Control module Part No.
• 0F = Index
• Airbag VW5 = System designation
• 02 = version number crash sensor

• 0004 = software version number

Lower line

• Coding XXXXX = Coding variants
• WSC XXXXX = Dealership number (Will be automatically stored in the control module when entering the system)

• Press → button.

Indicated on display:

Rapid data transfer HELP Enter address word XX