After An Accident With Belt TENSIONER And/Or Airbag Deployment
- Each time passenger airbag and/or belt pretensioner on passenger side is deployed, Seat Occupied Recognition Control Module -J706- basic setting must be performed. Perform the basic setting with a Vehicle Diagnosis Tester that has "Guided Fault Finding".
- If the seat rails and/or seat pan must be replaced after an accident due to deformation, seat occupied recognition must also be replaced with "seat occupied recognition repair kit". Then, Seat Occupied Recognition Control Module -J706- basic setting must be performed. Perform the basic setting with a Vehicle Diagnosis Tester that has "Guided Fault Finding".