Special Tools

Special tools and workshop equipment required 

• Drip Tray for -VAS 6100- -VAS 6208-
• Hex Extension -V.A.G 1669-
• Charging Device F/Haldex 2 Coupling -VAS 6291-
• Adapter for Oil Filling -VAS 6291/2-
  Fig 1: Identifying Charging Device F / Haldex 2 Couplings And Adapters

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Pressure Piece -3377-
  Fig 2: Identifying Sleeve 3158

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Pulling Hook -T20143-
  Fig 3: Identifying Extractor Hook T20143

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Thrust Piece -T10298-
  Fig 4: Identifying Thrust Piece T10298

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Thrust Piece -T10243-
  Fig 5: Identifying Thrust Piece T10243

  Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 6: Identifying Special Tools - Oil Seal For Left Flanged Shaft, Replacing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Slide Hammer-Complete Set -VW 771-
• Additional Part for -VW 771- -VW 771/37-
• Thrust Piece -3305-
• Torque Wrench (5-50 Nm) -V.A.G 1331-
• Torque Wrench (40-200 Nm) -V.A.G 1332-

Fig 7: Identifying Special Tools -- Right Flange Shaft, Removing And Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Used Oil Collecting and Extracting Device -V.A.G 1782-
• Puller -T10037-
• Socket and Extended Bit -T10107-

Fig 8: Identifying Special Tools -- Needle Bearing (Polygon Bearing) For Right Flanged Shaft, Replacing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Thrust Plate -VW 401-
• Thrust Plate -VW 402-
• Punch -VW 407-
• Thrust Disc -VW 412-
• Wheel Bearing Assembly Set -3253-
• Assembly Tool -T10047-

Fig 9: Identifying Special Tools -- Bevel Box Output Flange Seal, Replacing (Bevel Box Removed) (1 Of 2)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Holding Fixture -VW 313-
• Tube 42 mm Dia. -VW 516-
• Thrust Piece -40-105-
• Thrust Piece -T10049-
• Gearbox Support -T10108-
• Stop Plate -T10108/1-

Fig 10: Identifying Special Tools -- Bevel Box Output Flange Seal, Replacing (Bevel Box Removed) (2 Of 2)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Tapered Roller Bearing Puller -V.A.G 1582-
• Attachment to -V.A.G 1582- -V.A.G 1582/6A-
• Torque Wrench -V.A.G 1601-
• -1- 2-Arm Puller -20/10-
• 3-Arm Puller -45-2-

Edition 09222011