LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (2.0L - Exhaust System, Emission Controls - Engine Code(S): BPY (As Of 12.2010)) >> 26 Exhaust System, Emission Controls >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different variant/trim than selected.
Component Fastener Size Nm
Clamping Sleeve Nut - 25
Cross Member to Underbody Nut - 25
Front Exhaust Pipe with Catalytic Converter to Turbocharger Nut 1, 2 - 40
Oxygen Sensor (3) - 55
Suspended Mount Bolt - 25
(1) Always replace
(2) Lubricate the studs on the exhaust manifold with hot bolt paste
(3) Only use hot bolt paste to grease the threads; do not let the paste get onto the slits in the oxygen sensor body