Modifying The Adapter For Oil Filling -Vas 6262 A-

WARNING: This page is about a different variant/trim than selected.

Note the following information:

Regarding the respective repair information, refer to GENERAL REPAIR INFORMATION .
It may be necessary to shorten the pipe on the adapter for oil filling -VAS 6262 A-.

Shortening the Pipe on the Adapter for Oil Filling VAS 6262 A:

-- Shorten the pipe to dimension -a-. This assures the pipe on the adapter for oil filling -VAS 6262 A- will not touch the bottom of some oil containers.

Fig 1: Identifying Shortening Pipe On Adapter For Oil Filling VAS 6262 A

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-a- = 210 mm

NOTE:

Dimension -a- is measured starting from the shaft (green surface) on the adapter for oil filling -VAS 6262 A-.

-- Make a mark on the pipe at dimension -a-, and cut it using the pipe cutter -VAS 6056/2-.

Fig 2: Identifying Pipe Cutter -VAS 6056/2- And Direction Of Operation

Courtesy of VOLKSWAGEN UNITED STATES, INC.