Special Tools

Special tools and workshop equipment required 

• Compression Tester -V.A.G 1763-
• Adapter -V.A.G 1381/5A-
• Engine Support Bracket -T10339-
• Insert Pad for Front Fender -T40045-
• Adapter -10-222 A/18-
• Bracket For Engine -10-222 A/1-
• Engine Support Bridge -10-222 A-
• Guide Plate for FSI Engine -VAS 5161/19-
• Seal Puller-General Usage -2085-
• Adapter -2085/2-
• Assembly Tool -T10071-
• Puller -T40001-
• Claw -T40001/6-
• Claw -T40001/7-
• Ratchet Insert 1/4" -VAS 6234-
• TORX R Bit Set -V.A.G 1766-
• Torque Wrench (5-60 Nm) -V.A.G 1783-
• Dial Gauge Holder -VW 387-
  Fig 1: Identifying Dial Gauge Holder VW 387

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Thrust Piece -T10353-
  Fig 2: Identifying Thrust Piece T10353

  Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 3: Identifying Special Tools -- Cylinder Head, Removing And Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Drip Tray -V.A.G 1306-
• Torque Wrench (5-50 Nm) -V.A.G 1331-
• Torque Wrench (40-200 Nm) -V.A.G 1332-
• Spring Type Clip Pliers -VAS 5024 A-
• Polydrive Bit and Drive Socket -T10070-
• Ignition Coil Puller -T40039-

Fig 4: Identifying Special Tools -- Valve Stem Seals, Replacing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Spark Plug Removal Tool -3122 B-
• Valve Seal Removal Tool -3364-
• Valve Stem Seal Driver -3365-
• Adapter -T40012-
• Torque Wrench (5-50 Nm) -V.A.G 1331-
• Valve Cotters Asm/Disasm Device -VAS 5161-

Fig 5: Identifying Special Tools -- Camshaft Adjuster, Removing And Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Socket -T40080-
• Camshaft Clamp -T10252-
• Toothed Belt Tensioner -T10020-
• Locking Pin -T10115-
• Torque Wrench (40-200 Nm) -V.A.G 1332-