Leak Detection Pump -V144-

WARNING: This page is about a different variant/trim than selected.

Removing

-- Remove the right rear wheel housing liner. Refer to FRONT WHEEL HOUSING LINER .

-- Disconnect the vacuum line -1-.

Fig 1: Disconnecting Leak Detection Pump (LDP) V144 Electrical Harness Connector

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Disconnect the connector -2-.

-- Disconnect the vent line -3- by pressing the release button.

-- Remove the nuts -arrows-.

-- Disengage the leak detection pump with bracket.

Installing

Install in reverse order of removal. Note the following:

-- Install the right rear wheel housing liner. Refer to FRONT WHEEL HOUSING LINER .