EVAP System Function Overview
WARNING: This page is about a different variant/trim than selected.
- Evaporative Emission (EVAP) Canister
- Adapter for Evaporative Emission Tester KLI 9210/55-1 Installed Position
- Used during the fuel system leak test.
- EVAP Canister Purge Regulator Valve 1 -N80-
- Vent Line
- To the throttle valve control module.
- Solenoid Valve
- For the leak detection pump.
- Vacuum Line
- To the intake manifold.
- Air Filter
- For the leak detection pump.
- Leak Detection Pump -V144-
- Fuel Tank
- Cap