Windshield Washer Spray Nozzles
WARNING: This page is about a different variant/trim than selected.
Removing
-- Press nozzle upward -arrow A- and pull out flap at rear -arrow B-.
-- Disconnect hose -1- from spray nozzle and disconnect harness connector -2-.
Installing
-- Connect the connector -2- and attach the hose -1- to the spray nozzle.
-- Slide spray nozzle into installation opening until it engages audibly.
-- Adjust the spray nozzles. Refer to WINDSHIELD WASHER SYSTEM SPRAY NOZZLES, ADJUSTING .