Windshield And Rear Window Washer System

The following hose connection types are used for connecting hoses to pumps and washer nozzles or as separating points.

-- Disconnect by pulling apart both halves of coupling.

Fig 1: Identifying Washer Hose Coupling

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Reconnect by pushing both halves of coupling together until felt and heard to engage.

-- Disconnect by turning lock ring -1- through 90° -arrow- and then pulling apart both halves of coupling.

Fig 2: Connecting/Disconnecting Washer Hose Coupling (Type 1)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Reconnect by pushing both halves of coupling together and rotating locking ring -1- -arrow- until it engages.

-- Disconnect by lifting lock ring -1- approximately 1 mm -arrow- and then pulling apart both halves of coupling.

Fig 3: Connecting/Disconnecting Washer Hose Coupling (Type 2)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- To secure connection, connect hose connection and press in securing ring -1- until it engages.

-- To secure connection, connect hose connection and press in securing ring -1- until it engages.

-- Disconnect by raising clip -1- -arrow- and then separating coupling from jet.

Fig 4: Connecting/Disconnecting Washer Hose Coupling (Type 3)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- To secure connection, connect hose connection and press in securing ring -1- until it engages.