Wire Stripper Vas 1978/3

-VAS 1978/3- is used for professional stripping and cutting of wires.

Fig 1: Identifying Wire Stripper (VAS1978/3)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

The -VAS 1978/3- is a component of the Wiring harness repair kit -VAS 1978 B- and from the previous versions.

Wire stripper has an adjustable stop in its pliers-jaws which can be set to the desired length of wire insulation to be removed.

Stripping 

-- Set the slide-able stop in pliers-jaws to the desired length dimension to be stripped.

-- Insert wire end from front up to stop into jaws of pliers and squeeze the pliers completely.

Fig 2: Identifying Stripping Pliers To Strip Wiring Insulation

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Open pliers again and remove the stripped wire end.

-- If necessary, cut wires using side-cutter function on the top of the wire stripper.

Fig 3: Identifying Wire Stripper To Cut Wire

Courtesy of VOLKSWAGEN UNITED STATES, INC.