Checking Measurement

• The selected adjusting shim is installed.

-- Position the measuring tools on the clutch housing and secure them with the bolt -arrow-.

Fig 1: Identifying Measuring Tools, Secure With Bolt To Clutch Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Set the dial gauge (3 mm range) with a 1 mm preload to "0".

-- Loosen the bolts for the clutch housing to transmission housing in a diagonal sequence until the bolts clear the transmission housing and output shaft.

-- For the correctly selected adjustment shim, the dial gauge must now display a value of 0.15 mm to 0.25 mm.