Transmission, Without A Sealing Cap CIRCLIP: Notes
WARNING: This page is about a different variant/trim than selected.
-- Transmission housing without the sealing cap circlip -A-.
Special tools and workshop equipment required
- Holding Plate VW 309
- Holding Fixture VW 313
- Transmission Support VW 353
- Thrust Tube VW 455 or Sleeve 3160
- Slide Hammer-Complete Set VW 771
- Extractor Lever VW 681
- Bracket 30-211A
- Thrust Piece T10042
- Thrust Piece T40008
- Torque Wrench (5-50 Nm) V.A.G 1331
- Hot Air Blower V.A.G 1416
- Drift T10169 or T10362
- Socket and Extended Bit T10107 or T10107 A