Tire, Removing
WARNING: This page is about a different variant/trim than selected.
NOTE:
Tires which have been filled or sealed with tire sealant, must be drained before removing from wheel.
WARNING:
- Prevent tire sealant from making contact with eyes and skin.
- It is harmful to health, can cause eye irritation and allergies.
- Wear protective gloves and glasses when removing tires.
-- Set wheel on an even surface.
-- Remove tire valve insert.
-- Carefully drill hole in tire in area of shoulder using suitable drill or cutter.
-- Hold wheel over drip tray and allow tire sealant to drain.
-- Remove tire from wheel rim.
-- Clean wheel rim, for example using a damp cloth.