Disc Wheel, Checking Radial And Lateral Run Out: Notes

-- Mount the disc wheel on the wheel balancer.

-- Use the centering system for wheel balancing machines VAS 5271.

-- Load the tire dial gauge approximately 2 mm.

-- Slowly turn the disc wheel.

-- Note the smallest and the largest dial readings.

Fig 1: Identifying Areas To Check Wheel For Radial Run-Out & Lateral Run-Out

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

S -

Lateral run-out

H -

Radial run-out

-- Compare determined value with specifications in the table DISC WHEEL, CHECKING RADIAL AND LATERAL RUN OUT => Specifications for radial and lateral run-out on disc wheel .