Tire Pressure Sensor Assembly Overview

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Assembly Overview: Tire Pressure Sensor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Tire Pressure Sensor --
- Supplied complete as replacement part
- Removing and installing, refer to TIRE PRESSURE SENSOR
- When battery is discharge, the entire ire pressure sensor must be replaced
- After using a wheel repair kit, the bore for the valve and opening of the pressure sensor must be wiped clean.
Valve Core
- Replace at every tire change
  NOTE:
  Use only original manufacturer's valve insert, it has a special coating!
Sealing Washer
Seal
- Is slightly deformed when tightening the union nut -6-
Disc Wheel
- Mounting tires (wheels with tire pressure monitoring system), refer to TIRES, WHEELS WITH TIRE PRESSURE MONITORING SYSTEM
- Mounting tires with emergency running characteristics, refer to RUN-FLAT TIRES
Union Nut
- 8 Nm
Valve Cap
- Do not use Comfort valve caps and metal caps