Crankshaft Dimensions
WARNING: This page is about a different variant/trim than selected.
(Dimensions are in mm)
| Honing Dimension | Crankshaft Bearing Pin Diameter | Connecting Rod Bearing Pin Diameter | ||
|---|---|---|---|---|
| Basic dimension | 54.00 | -0.017 -0.037 | 47.80 | -0.022 -0.042 |
| 1st oversize | 53.75 | -0.017 -0.037 | 47.55 | -0.022 -0.042 |
| 2nd oversize | 53.50 | -0.017 -0.037 | 47.30 | -0.022 -0.042 |
| Stage III | 53.25 | -0.017 -0.037 | 47.05 | -0.022 -0.042 |