Special Tools

Special tools and workshop equipment required 

• Micrometer 75-100 mm VAS 6071
• Cylinder Gauge VAS 6078
• Adapter T10055/3
• Drift VW 207 C
• Kukko Extractor 14.5-18.5 mm 21/2
• Locking Pin T10060 A
  Fig 1: Identifying Locking Pin T10060 A

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Flywheel Retainer 3067
  Fig 2: 3067 Counter-Hold Tool

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Flywheel Lock Adapter VW 558
  Fig 3: Counter hold VW 558

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Puller T10055
  Fig 4: Identifying Puller T10055

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Centering Mandrel 3176
  Fig 5: 3176 Centering Mandrel

  Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 6: Identifying Special Tools -- Crankshaft Seal, Ribbed Belt Side, Replacing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Seal Remover 3203
• Counter Support 3415
• Assembly Tool T10053
• Torque Wrench (5-50 Nm) V.A.G 1331
• Torque Wrench (40-200 Nm) V.A.G 1332