Sensor Wheel

WARNING: This page is about a different variant/trim than selected.

-- Always replace the sensor wheel -2- whenever the screws -1- are removed.

Fig 1: Identifying Attachment Points, Countersunk Screws, Crankshaft & Sensor Wheel

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE:

After tightening the screws a second time, the attachment point of the screws for the sensor wheel are so deformed that the screw heads -arrows- lie on the crankshaft -3- and the sensor wheel is loose underneath the screws.

Installation of the sensor wheel is only possible in one position, the bore holes are shifted.