LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (2.0L - Crankshaft, Cylinder Block - Engine Code(S): BPY) >> 13 Crankshaft, Cylinder Block >> General Information >> Bearing Shell, Installed Position

Bearing Shell, Installed Position

WARNING: This page is about a different variant/trim than selected.

Bearing shell -1- with connecting rod oil bore -arrow-.

Fig 1: Bearing Shells - Installed Positions
GWWN13-0671Courtesy of VOLKSWAGEN UNITED STATES, INC.

Bearing shell -2- without a oil bore for the connecting rod cap.

-- Place bearing shells centrally into the connecting rod and connecting rod bearing cap.

Dimension -a- must be the same on the left and right sides.

scientia non olet · About LEMON Manuals