Fastener Tightening Specifications

WARNING: This page is about a different variant/trim than selected.

Component

Fastener Size

Charge Air Cooler Bolt

Charge Air Pipe to Cylinder Block Bolt ^{3, 5}

Charge Air Pipe to Cylinder Block Bolt ⁽⁴⁾

Charge Air Pressure Sensor to Charge Air Pipe Bolt

Connection to Turbocharger Bolt

Coolant Return Pipe Bracket to Cylinder Head Bolt

Coolant Return Pipe Bracket to Turbocharger Bolt

Coolant Return Pipe to Turbocharger Banjo Bolt

Coolant Supply Pipe Bracket to Cylinder Block Bolt

Coolant Supply Pipe to Turbocharger/Cylinder Block Bolt

Exhaust Manifold/Turbocharger Support to Cylinder Head Bolt ⁽²⁾

Exhaust Manifold/Turbocharger Support to Exhaust Manifold/Turbocharger Support Bolt ⁽²⁾

Exhaust Manifold/Turbocharger Support to Turbocharger Bolt ⁽²⁾

Exhaust Manifold/Turbocharger to Cylinder Head Nut ^{1, 2}

Fastening Strip to Cylinder Head Nut ^{1, 2}

Noise Generator Bracket to Plenum Chamber Bulkhead Nut ⁽⁴⁾

Noise Generator to Noise Generator Bracket Bolt ⁽⁴⁾

Oil Return Pipe to Turbocharger/Cylinder Block Bolt

Oil Supply Pipe Bracket to Turbocharger Bolt

Oil Supply Pipe to Turbocharger/Cylinder Block Banjo Bolt

Plenum Chamber Bulkhead Bolt ⁽⁴⁾

Turbocharger Recirculation Valve to Turbocharger Bolt

Vacuum Diaphragm to Turbocharger Bolt

Ventilation Tube/Heat Shield to Turbocharger Bolt

Wastegate Bypass Regulator Valve to Bracket Bolt

Wastegate Bypass Regulator Valve Bracket to Turbocharger Bolt

Wastegate Bypass Regulator Valve Hose Ring Connection Banjo Bolt

⁽¹⁾	Always replace

⁽²⁾	Coat with hot bolt paste .

⁽³⁾	For bolt tightening clarification, see -items 5 and 10- in the .

⁽⁴⁾

GTI

⁽⁵⁾	Eos and Passat