Special Tools

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Thrust Piece T10148
Spindle from Seal Installer-Rear Differential 3066
Slide Hammer-Complete Set VW 771
Additional Part for VW 771 VW 771/37
Punch VW 408 A
Thrust Piece VW 473
Press Support-R&I Wheel Brg's 3144
Thrust Pad 2007
Torque Wrench (40-200 Nm) V.A.G 1332
Drip Tray V.A.G 1306

Fig 1: Drip Tray V.A.G 1306
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Thrust Piece T10160

Fig 2: Identifying Thrust Piece T10160
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Subframe Support Assembling Device 3253/2

Fig 3: Identifying Alignment Fixture 3253/2
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 4: Identifying Special Tools -- Differential, Adjusting

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Dial Gauge Holder VW 387
Magnetic Plate 50 mm Dia. VW 385/17
Punch VW 407
Thrust Pad 30 - 205
Torque Wrench (5-50 Nm) V.A.G 1331
-1- Kukko Extractor 46-58 mm 21/7
-4- Kukko Support 22/2

Fig 5: Identifying Special Tools -- Differential, Disassembling And Assembling

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Tapered Roller Bearing Puller V.A.G 1582
Attachment to VAG 1582 V.A.G 1582/3
Thrust Disc VW 412
Thrust Plate VW 401
Thrust Plate VW 402

Edition 08092011