Special Tools

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Micrometer 75-100 mm VAS 6071
Cylinder Gauge VAS 6078
Crankshaft Adapter T03003
Locking Pin T40069
Dial Gauge Holder VW 387

Fig 1: Dial Gauge Holder VW 387
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Dial Gauge 0-10 mm VAS 6079

Fig 2: Dial Gauge VAS 6079
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Locking Pin T10060 A

Fig 3: Identifying Locking Pin T10060 A
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Trim Removal Wedge 3409

Fig 4: 3409 Wedge
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Oil Seal Guide Sleeve T03004

Fig 5: Identifying Assembly Sleeve T03004
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Assembly Tool T10122

Fig 6: Identifying Pulling Fixture T10122
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Pulling Hook T20143

Fig 7: Extractor Hook T20143
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 8: Identifying Special Tools -- Cylinder Head, Removing And Installing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Drip Tray V.A.G 1306 or Drip Tray for VAS 6100 VAS 6208
Torque Wrench (5-50 Nm) V.A.G 1331
Torque Wrench (40-200 Nm) V.A.G 1332
Spring Type Clip Pliers VAS 5024 A
Polydrive Bit and Drive Socket T10070
Ignition Coil Puller T40039