LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (Gears, Shafts - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Removing the Bearing Inner Race/Large Tapered Roller Bearing

Removing the Bearing Inner Race/Large Tapered Roller Bearing

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pulling Off Large Inner Race/Tapered Roller Bearing
GWWV35-1132Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-A- vice protectors

-- Before installing puller, insert a bolt M10 x 20 in the bore of the output shaft.

scientia non olet · About LEMON Manuals