Removal And Installation: Transmission: Notes
WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Engine Support Bridge 10-222 A
- Engine Support Feet 10-222 A/8
- Additional Hooks 10-222 A/2
- Engine Support Adapter 10-222 A/3
- Adapter 10-222 A/16
- Transmission Support 3282
- Shackle 10-222 A/12
- Adjustment Plate 3282/39
- Support Elements (determine when installing the adjustment plate onto the transmission support)
- Engine-/Gearbox Jack V.A.G 1383 A
- Torque Wrench (5-50 Nm) V.A.G 1331
- Torque Wrench (40-200 Nm) V.A.G 1332
- Transmission Support Jig 3336
- Grease for Clutch Plate Splines G 000 100