Engine And Transmission Mount And Bracket Overview

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine And Transmission Mount And Bracket Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- 20 Nm + 90° (1/4) additional turn.
- Always replace
- Tightening sequence, refer to Fig 3.
- Transmission support to the transmission mount bracket and the transmission.
Transmission Support
- Transmission mount bracket and the transmission.
Engine Mount with Engine Mount Bracket
- Refer to Specifications .
Bolt
- Pendulum support to subframe.
- Refer to Specifications .
Pendulum Support
- Refer to Specifications .
Bolt
- Pendulum support to transmission.
- Refer to Specifications .
Bolt
- Pendulum support to transmission.
- Refer to Specifications .
Bolt
- 40 Nm + 90° (1/4) additional turn.
- Always replace.
- Transmission mount bracket to transmission.
Transmission Mount Bracket
Transmission Mount
Bolt
- Transmission mount to chassis.
- Refer to Specifications .
Bolt
- 60 Nm + 90° (1/4) additional turn.
- Always replace.
- Transmission mount to transmission mount bracket.

Fig 2: Identifying Left Subframe Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install new bolts -arrows-.

-- Tighten the bolts hand tight.

-- Tighten the bolts to specification.

Fig 3: Identifying Transmission Support And Slave Cylinder

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install new bolts -arrows-.

-- Tighten the bolts hand tight.

-- Tighten the bolts to specification.