Transmission, Transporting

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Transmission Support Jig 3336

-- Install the 3336 to the clutch housing.

Fig 1: Securing Transmission Support Jig 3336 To Clutch Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Move the support arm on the sliding bar using the locking bolt -arrow-.

Fig 2: Adjusting Support Arm On Sliding Piece With Locking Pin

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Number of visible holes = 5.

-- Lift the transmission using a workshop crane and the 3336.

-- Set the transmission down, for example, into the transport container.