LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Controls, Housing - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 34 Controls, Housing >> Disassembly And Assembly >> Transmission Housing And Clutch Housing >> Installing The Sleeve

Installing The Sleeve

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Spindle From Seal Installer Set - Rear Diff 3066 Into Threaded Piece Of Differential
GWWN34-0743Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach the spindle -A- on the 3066 into the threaded piece on the differential.

-- Turn the nut -B- and pull the sleeve all the way over the 3124.

NOTE:

If the transmission is disassembled, press the sleeve in onto the stop with the 3124.