LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Controls, Housing - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 34 Controls, Housing >> Disassembly And Assembly >> Transmission Housing And Clutch Housing >> Installing The Needle Bearing

Installing The Needle Bearing

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driving In Needle Bearing To Stop
GWWV35-1150Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Secure the needle bearing at three points inside the transmission housing, offset by 120°, using a mandrel.

scientia non olet · About LEMON Manuals