LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Controls, Housing - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 34 Controls, Housing >> Disassembly And Assembly >> Shift Forks >> Removing The Angular Contact Ball Bearing

Removing The Angular Contact Ball Bearing

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Angular Contact Ball Bearing
GWWV34-2025Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Be careful not to bend the shift forks when removing and installing the angular contact ball bearing.

scientia non olet · About LEMON Manuals