LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Controls, Housing - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 34 Controls, Housing >> Disassembly And Assembly >> Shift Forks >> Installing The Lock Washer

Installing The Lock Washer

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Socket Driver & Jaw Protectors
GWWV34-2024Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the lock washer in the groove in the shift segment using a socket wrench

NOTE:

The shift segment must still rotate easily after the lock washer is installed.

A -

10 mm socket wrench

B -

Protective jaws

scientia non olet · About LEMON Manuals