LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Controls, Housing - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 34 Controls, Housing >> Description And Operation >> Shift Mechanism Overviews >> Shift Lever And Housing, Through 10.06 >> Selector Cable And Shift Cable, Removing And Installing

Selector Cable And Shift Cable, Removing And Installing

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing And Installing Selector Cable And Shift Cable
GWWN34-1367Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the lock washer from the shift cable -A- and the selector cable -B-.

Lift the tab with a screwdriver -arrow 1- and remove the lock washer -arrow 2-.

-- Remove the shift cable -A- from the shift lever mount.

-- Remove the selector cable -B- from the selector bracket mount.

scientia non olet · About LEMON Manuals