LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Controls, Housing - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 34 Controls, Housing >> Description And Operation >> Shift Mechanism Overviews >> Shift Lever And Housing, Through 10.06 >> Lock Washer, Removing And Installing

Lock Washer, Removing And Installing

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Locking Washer, Spacer Bushing & Stop
GWWN34-1363Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the bushing -arrow B- all the way in the -direction of arrow C- and remove or install the lock washer -arrow A-.

NOTE:

Do not tilt the bushing when pushing it down.

The slot in the lever for the lock washer must be visible.

Carefully release the tension on the spring.

scientia non olet · About LEMON Manuals