Oil Separator

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Remove the noise insulation. Refer to Description and Operation .

-- Remove the bolts -1 through 9- and remove the oil separator.

Fig 1: Identifying Oil Separator Tightening Sequence

Courtesy of VOLKSWAGEN UNITED STATES, INC.

CAUTION:

Risk of contaminating the lubricating system.

Seal the opening with a clean cloth.

Installing

NOTE:

Always replace gaskets and seals.

Secure all hose connections with hose clamps appropriate for the model.

Installation is performed in the reverse order of removal, noting the following:

-- Tighten the bolts in sequence -1 through 9- to 9 Nm.

Fig 2: Identifying Oil Separator Tightening Sequence

Courtesy of VOLKSWAGEN UNITED STATES, INC.