Fuel Level Sensor -G-

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT .

-- Pull the fuel level sensor slightly to the side and simultaneously upward.

Fig 1: Pulling Fuel Level Sensor G Slightly To Side And Simultaneously Upward

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- If the sensor cannot be released this way, then press the retaining tabs -arrows- to the side slightly.

Fig 2: Identifying Retaining Tabs

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Note the color of the wires for installing later.

-- Disengage the wires -1 through 3- and disconnect them. Bend the retaining hooks on the connectors back.

Fig 3: Identifying Fuel Level Sensor Electrical Wires

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing

-- Connect the wires -1 through 3-. Note the color coding.

Fig 4: Identifying Fuel Level Sensor Electrical Wires

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Pull on the connectors to make sure they are securely fastened.

-- Insert the fuel level sensor into the guides on the fuel delivery unit and push down until it engages.

-- Install the fuel delivery unit. Refer to FUEL DELIVERY UNIT .